Keislers 5 speed ?

Reply Subscribe

Thread Tools

Search this Thread

Dec 13, 2007 | 12:57 PM

LOTSARED

Thread Starter

Instructor

Joined: Jul 2007

Posts: 108

Likes: 0

Keislers 5 speed ?

Saw a recent post about a Keislers 5 speed in a C3. RPM at 80mph was around 2000.
Anyone know approx cost of this swap? Including the trans, any console or frame mods, and installation by a qualified shop.
I deal with a shop that could do it, just curious what the whole project would run.
Thanks-

Dec 13, 2007 | 01:30 PM

SHAKERATTLEROLL

Melting Slicks

Joined: Nov 2003

Posts: 2,362

Likes: 1

From: San Antonio TX

Here you go. You will find a bunch of info here.

http://www.classicchevy5speed.com/Co...tallation.aspx

You could also go here. http://www.keislerauto.com/gm/corvette-c3-kits.html

Dec 13, 2007 | 01:47 PM

K-bel

Cruising

Joined: Dec 2007

Posts: 12

Likes: 0

From: Birdel

Quote:

Originally Posted by SHAKERATTLEROLL

Here you go. You will find a bunch of info here.

http://www.classicchevy5speed.com/Co...tallation.aspx

You could also go here. http://www.keislerauto.com/gm/corvette-c3-kits.html

Great info

Thanks

Dec 13, 2007 | 02:04 PM

SHAKERATTLEROLL

Melting Slicks

Joined: Nov 2003

Posts: 2,362

Likes: 1

From: San Antonio TX

Quote:

Originally Posted by K-bel

Great info

Thanks

You are very welcome.

If you go to the Classic site they do have some nice vid's of the install along with some other information on them. Well done and does show a bunch of good info.

Dec 13, 2007 | 02:22 PM

0Paul Ruggeri

Former Vendor

Joined: Nov 2006

Posts: 2,482

Likes: 3

From: Carmichael ca

I've installed 2 of the Keisler Tremec kits. No modifications required. Takes about 4-5 hours. Both customers are very happy with the results.

Paul

Dec 13, 2007 | 04:14 PM

rj8806

Melting Slicks

Joined: May 2005

Posts: 2,826

Likes: 3

From: Tennessee

Quote:

Originally Posted by LOTSARED

Is the car a 4 speed now or an automatic?
If it is a 4 speed already the cost is $3195 if it is an automatic the cost is $4500. These prices are for the kit. The labor is a different story. I would guess if it is a 4 speed now, the labor would be around 8-10 hours. If auto, probably around 15 hours or so. Keep in mind, if the installer has done this swap already the labor could be less.
We also have a Forum discount right now. $150 off of 4 speed swap and $200 off of auto to manual swap. Also we have $100 off of shipping.

Hope this helps.

If you need any more help from us, let me know.

Richard
Tech Support
Keisler Engineering

Last edited by rj8806; Dec 13, 2007 at 04:23 PM.