73 AIM
Thread Starter
Race Director
Joined: Apr 1999
Posts: 15,133
Likes: 477
From: NM
73 AIM
Was just going through the AIM for my '73 and discovered I have a page missing. Anyone got a 73 AIM and able to scan the page and share with me?
I am missing UPC 8D Sheet 1. This would be the page for the evaporator canister hose routing for the L48 and L82. Mine has two pages (dups) for the LS4. My AIM is from Mid America and their page numbering is page 329.
Help :)
tom...
I am missing UPC 8D Sheet 1. This would be the page for the evaporator canister hose routing for the L48 and L82. Mine has two pages (dups) for the LS4. My AIM is from Mid America and their page numbering is page 329.
Help :)
tom...
Advanced
Joined: Aug 2000
Posts: 70
Likes: 0
Re: 73 AIM (Tom73)
Hi Tom73 and trw
I have a assembly manual for the '73.. I have a different page 329 versus 330. It looks to be correct for the small block. In the discription block it states 8D sheet 2, but it is different than page 330. I would be willing to send a copy by mail...(at no charge)... all that is needed is your street address... Its about 730am California time and will be leaving for work shortly... I will check my e-mail tonight...
I have a assembly manual for the '73.. I have a different page 329 versus 330. It looks to be correct for the small block. In the discription block it states 8D sheet 2, but it is different than page 330. I would be willing to send a copy by mail...(at no charge)... all that is needed is your street address... Its about 730am California time and will be leaving for work shortly... I will check my e-mail tonight...
Thread Starter
Race Director
Joined: Apr 1999
Posts: 15,133
Likes: 477
From: NM
Re: 73 AIM (Tom73)
Well still striking out.
Any one have the missing page, UPC 8D, Sheet 1. The one needed covers the L48 and L82. Sheet 2 is for the LS4.
Anyone????
tom...
[Modified by Tom73, 11:39 PM 12/1/2001]
Any one have the missing page, UPC 8D, Sheet 1. The one needed covers the L48 and L82. Sheet 2 is for the LS4.
Anyone????
tom...
[Modified by Tom73, 11:39 PM 12/1/2001]
Melting Slicks
Joined: Sep 2000
Posts: 2,403
Likes: 416
From: Chester Virginia
Re: 73 AIM (blu73)
You will note that page 330 shows a metal tube from the carb to the PCV valve while page 329 shows a rubber hose: this hose is fastenened to the AIR hose, that is why the AIR parts are shown. Also part numbers are different and the revision block is blanked out. I believe page 330 was the original sheet and page 329 was an updated sheet. I suppose they figured the sheet for the 350's was not needed. By the way what does the 1YA00 in the title block stand for: is it not the standard Corvette.
Roger
Roger
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Thread Starter
Race Director
Joined: Apr 1999
Posts: 15,133
Likes: 477
From: NM
Re: 73 AIM (RMS73)
Roger,
To me it looks like the drawings with the AIR hoses is an update of the other since ALL 73s came with the AIR system. But the two still have the same page number. So still looking for Sheet 1.
The 1YA00 is some type of designation for the Corvette, don't have the AIM here at the office, but the code is listed somewhere in the front of the AIM.
tom...
[Modified by Tom73, 9:41 AM 12/4/2001]
To me it looks like the drawings with the AIR hoses is an update of the other since ALL 73s came with the AIR system. But the two still have the same page number. So still looking for Sheet 1.
By the way what does the 1YA00 in the title block stand for: is it not the standard Corvette.
tom...
[Modified by Tom73, 9:41 AM 12/4/2001]
Melting Slicks
Joined: Sep 2000
Posts: 2,403
Likes: 416
From: Chester Virginia
Re: 73 AIM (Tom73)
In the NCRS Judging Manual on page 88, AIM page 8D-1 is shown. It is not real clear, but the hose routing can be made out. After New Years I get back to work and make a copy and mail it to you.
Roger
Roger
