Dynomax Header gasket question
Thread Starter
Le Mans Master
Joined: Jul 1999
Posts: 9,206
Likes: 17
From: Sewell NJ
Dynomax Header gasket question
I'm ordering my headers tonight (wife's Christmas present) along with what I need to install them. I'm going to go with copper collector gaskets and Stage 8 locking bolts. My question is about the header to head gasket. I'm going to go with either a dead soft copper or aluminum gasket but when I looked in the summit catalog they list square or round configurations. I know the stock gaskets are square but looking at the headers they look like they have round pipes. What to order? Earl's Pressure Master sets come in 1.36"x1.36" or 1.50"x1.50" or 1.59" round. Also, do any of you have a preference for aluminum or copper? Any help would be appreciated. Thanks. :confused: :confused:
Racer
Joined: Apr 1999
Posts: 422
Likes: 3
From: Oxford MI
Re: Dynomax Header gasket question (vettfixr)
Good luck with the copper gaskets. I bought a set for my Dynomax headers and could not get them to seal. I went back to conventional fiber gaskets and no problems.
Thread Starter
Le Mans Master
Joined: Jul 1999
Posts: 9,206
Likes: 17
From: Sewell NJ
Re: Dynomax Header gasket question (SteveG75)
Thanks, sounds like the round ports are the right one's. I'm not sure which brand I will go with but I'll make sure it's a good one like Percy's, SCE, or Earl's.
Burning Brakes
Joined: Apr 2000
Posts: 1,145
Likes: 1
Re: Dynomax Header gasket question (vettfixr)
I have gone through a few sets to finally get a good seal. I am now running Mr Gasket 'ultra gasket'. It fits the ports perfectly and is much tougher than most fiber gaskets so they won't get brittle and crack...
cheap at the local Kragen's too..
cheap at the local Kragen's too..
Burning Brakes
Joined: Dec 2000
Posts: 962
Likes: 0
From: Carlisle PA
Re: Dynomax Header gasket question (vettfixr)
When selecting header gaskets, you want to go with the shape of the header tube, in this case round. I've heard too many complaints using the copper gaskets that they won't seal. Have heard mostly good on the aluminum gaskets, not sure if it's worth the money though. Mr. Gasket Ultra Seal exhaust gaskets do a wonderful job for 1/2 the price.
As far as the Stage 8.. I know alot of people on the board swear by them, but for me the ARP's do just fine after retorqing them once.
Keith
As far as the Stage 8.. I know alot of people on the board swear by them, but for me the ARP's do just fine after retorqing them once.
Keith
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Team Owner
Joined: Feb 2001
Posts: 49,198
Likes: 0
From: All in!
Cruise-In IV Veteran
St. Jude Donor '03-'10
Re: Dynomax Header gasket question (vettfixr)
I'm ordering my headers tonight (wife's Christmas present) along with what I need to install them.
Thread Starter
Le Mans Master
Joined: Jul 1999
Posts: 9,206
Likes: 17
From: Sewell NJ
Re: Dynomax Header gasket question (70PurpleLS7)
When selecting header gaskets, you want to go with the shape of the header tube, in this case round.
