trailing arm rebuild
Thread Starter
Instructor
Joined: Mar 2006
Posts: 107
Likes: 0
trailing arm rebuild
Ok I have taken my bent trailing arm off and completly disasembled it so I can rebuild a new one useing my bearings and stuff. My question is do you guys know of a place that just sells like a whole bushing kit? Pretty much all of my bushings look like 30 year old rubber should look, so i want to just replace them all, both sturt rod bushings, trailing arm bushings, the bushings where the spring connects to the trailing arm..... I can find them all sepreatly, and I figure if Im goin to do it I might as well go with the poly ones, but they add up fast if you buy them sepratly, So i just figured some one must sell a whole kit. Im only doing one side, but if the kit comes with both sides not a big deal becuase im sure those bushings are all shot too. Thanks for any info.
Team Owner
Joined: Oct 2004
Posts: 23,831
Likes: 10
From: Springfield MO
St. Jude Donor '07
Ok I have taken my bent trailing arm off and completly disasembled it so I can rebuild a new one useing my bearings and stuff. My question is do you guys know of a place that just sells like a whole bushing kit? Pretty much all of my bushings look like 30 year old rubber should look, so i want to just replace them all, both sturt rod bushings, trailing arm bushings, the bushings where the spring connects to the trailing arm..... I can find them all sepreatly, and I figure if Im goin to do it I might as well go with the poly ones, but they add up fast if you buy them sepratly, So i just figured some one must sell a whole kit. Im only doing one side, but if the kit comes with both sides not a big deal becuase im sure those bushings are all shot too. Thanks for any info.
