Header issue for 582
Thread Starter
Racer
Joined: Oct 2007
Posts: 327
Likes: 1
Header issue for 582
2 1/4 is recommended, but i could go to 2 1/8. my problem is clutch linkage, my solution is mcleod hyraulic to eliminate linkage. Has anybody used this in conjunction with hydroboost? Hooker makes 2 1/8, and has anybody used them with 355 dart pro 1 heads with clutch linkage?
Last edited by jboweriii; Jun 19, 2008 at 07:16 PM.
Race Director
Joined: Jan 2000
Posts: 13,017
Likes: 2,261
From: Corsicana, Tx
2020 C2 of the Year - Modified Winner
2020 Corvette of the Year (performance mods)
C2 of Year Winner (performance mods) 2019
2017 C2 of Year Finalist
I'll say it again,,,contact PEF427 here on the Forum. He's done what you are wanting to do.
JIM
JIM
Burning Brakes
Joined: Dec 2004
Posts: 1,020
Likes: 1
From: Nederland Texas
I re-fabbed my 2 1/8 Hookers to work with the talldeck 598 and raised port Dart 355 CNC'd heads. I do not have hydroboost or power steering for that matter. My car steers easily.
I do have the McLeod Hydraulic Clutch and it works very well. I used a heim joint setup on the clutch pedal/rod to adjust it.
-Patrick
I do have the McLeod Hydraulic Clutch and it works very well. I used a heim joint setup on the clutch pedal/rod to adjust it.
-Patrick
