Starter Question
Thread Starter
Instructor
Joined: Oct 2004
Posts: 208
Likes: 0
From: Cumberland RI
Starter Question
Hi All, Every now and then I would get that grinding sound when I'd fire up my car, so I replaced my starter. I did'nt want to get into finding out if the solenoid was bad so I just replaced the whole thing. Well guess what, after a week of no problems, it's back to the every now and then grind sound, any ideas as to what is causing this problem??? Thanks
Melting Slicks
Joined: Oct 2002
Posts: 2,314
Likes: 111
From: St Louis MO
Could you supply more details?
If it is due to the starter pinion not disengaging from the flywheel/flexplate, the clearance can be adjusted by adding a shim or two between the starter and the block.
If it is due to the starter pinion not disengaging from the flywheel/flexplate, the clearance can be adjusted by adding a shim or two between the starter and the block.
Thread Starter
Instructor
Joined: Oct 2004
Posts: 208
Likes: 0
From: Cumberland RI
Ok, I will look into this part, as for a tooth that may be missing on the flywheel, oh boy, that will be a big pain in the ***, thanks alot for the help guys.
