Steeroid steering
Thread Starter
Racer
Joined: Aug 2005
Posts: 456
Likes: 0
From: Forty Fort PA
Steeroid steering
Hi. Looking for ideas. I installed the Steeroids system last fall and all was well. I had the front end aligned and all was well. Now I replaced the new lower ball joints from VB&P and the steering wheel is cocked about 20 degrees to the right of center. Also, when I turn the wheel, it feels like the steering hits an obstruction before it turns. This happens either right or left.
Any thoughts?
Thanks for taking the time to read this
Lang
Any thoughts?
Thanks for taking the time to read this
Lang
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Just out of curiosity how did you get the heim joints off the old ball joints? If you used a pickle fork you may have damaged the heim joint and it could be binding on itself causing that feeling. I don't know this for sure but just throwing something out there.
