Help for my MOPAR buddy
Thread Starter
Intermediate
Joined: Jul 2001
Posts: 37
Likes: 0
Help for my MOPAR buddy
My buddy is looking for a set of used headers for his MOPAR. He needs headers that will fit a 400 and accomodate a A-frame (Dart). If anyone has any tips it would be greatly appreciated. He is also looking for an 800cfm Holley with mechanical choke.
Pro
Joined: Dec 2000
Posts: 531
Likes: 0
Re: Help for my MOPAR buddy (LT1man)
Is a 400 a small block or big block Mopar? I've got a buddy that's into Mopars. I built a 360 for his 66 Belvedere, went 12.52 on it's first pass. Mopars aren't that hard to get good power from, there just a bit ugly to look at. :D
Racer
Joined: Feb 2001
Posts: 318
Likes: 0
From: Morrisdale Pa
Re: Help for my MOPAR buddy (Racer16k)
Headers and A Body cars are a pain in the (*&&^) But tell him to look on http://www.swapzone.net They have a mopar section for cars and parts for sale.
Instructor
Joined: Nov 2001
Posts: 131
Likes: 0
From: Tilton NH
Re: Help for my MOPAR buddy (LT1man)
I have had many a Mopar big and small blocks. (couldn't afford a vette back then) I believe Hooker is the only one that make headers for a B block in an A body. I believe you can get headers that stay within the engine compartment for a B block (361/383/400) but for a RB (413/426W/440) your only choice is fender well headers. Anyway I believe they are pretty expensive and I think you will have a tough time finding them used. Not to say that you can't. Try the mopar mailing list (man_box1@che.tamu.edu) I think you can send a command to that address "help" or "subscribe"
good luck
VC
good luck
VC
Melting Slicks
Joined: Mar 2000
Posts: 3,206
Likes: 0
From: WANTED: '68 rear valance with b/u light assemblies IM, e-mail, or PM me here. Thanks!
Re: Help for my MOPAR buddy (LT1man)
Tell him good luck! Quality used MOPAR headers are hard to come by. If he decides to buy new one have him look into CPPA headers. CPPA knows MOPARs! Leave the Hookers for Brand X cars.
