anybody use cranes nitrous cams?
Thread Starter
Le Mans Master
Joined: Jul 2001
Posts: 9,622
Likes: 16
From: absecon nj
anybody use cranes nitrous cams?
im looking for a new cam for my other motor that im building ...i was just looking at cranes nitrous grinds...heres an example...h-272-2 216/228 .050 272/284 adv.dur. 454 in 480 ex. lift 112 lobe separation(actually not this one this is small)..just wondering if anybody used one yet?im probably going back to solid cam but still looking around.
Team Owner
Joined: Apr 1999
Posts: 21,953
Likes: 1,445
From: Reno Nevada
2024 C3 of the Year Finalist- Modified
Re: anybody use cranes nitrous cams? (pats406nitrovette)
If you get down. You have to get wide split duration. The free flowing exhaust is where the power is ......... That's why I went with bigger exhaust valves. I went with the bigger exhaust 1.625 instead of 2.10 1.6 so i did the 2.08/1.1625 and max porting.
240/248 @ .050 solid roller with faster ramps .635/644 1.65 crower intakes and 1.6 E
It's a nice street motor
240/248 @ .050 solid roller with faster ramps .635/644 1.65 crower intakes and 1.6 E
It's a nice street motor
