Distributor Recommendations
Thread Starter
Burning Brakes
Joined: Mar 2001
Posts: 998
Likes: 0
From: Missouri City Texas
Distributor Recommendations
I need to replace mine since it is dying a slow agonizing death (mostly for me).
Anyway from researching the CF archives the MSD Ignition Control
Corvette Tach Drive PN 8572 seems to be the favored choice. Is this a pointless distributor or electronic? I already have the msd ignition so that is not an issue. Has anyone found it for less than $286?
If it does have points does anyone have any recommendations for a pointless dist?
Oh yeah - I need a tac drive too.
As always, thanks in advance.
Anyway from researching the CF archives the MSD Ignition Control
Corvette Tach Drive PN 8572 seems to be the favored choice. Is this a pointless distributor or electronic? I already have the msd ignition so that is not an issue. Has anyone found it for less than $286?
If it does have points does anyone have any recommendations for a pointless dist?
Oh yeah - I need a tac drive too.
As always, thanks in advance.
Le Mans Master
Joined: Jul 2001
Posts: 9,622
Likes: 16
From: absecon nj
Re: Distributor Recommendations (Scott A)
yeah thats the one to go with.. its electronic and wires right to the msd box...smart choice..and its tach driven too.and i havent found it for less same price i paid for it.
[Modified by pats406nitrovette, 8:03 PM 1/11/2002]
[Modified by pats406nitrovette, 8:03 PM 1/11/2002]
Drifting
Joined: Oct 2001
Posts: 1,699
Likes: 1
From: Westampton NJ
Re: Distributor Recommendations (Scott A)
I agree with Pat...and I don't have quite the monster engine...but she does pull hard, especially above 3,000...all the way to the 6000 rev limiter installed on the MSD.
Thread Starter
Burning Brakes
Joined: Mar 2001
Posts: 998
Likes: 0
From: Missouri City Texas
Re: Distributor Recommendations (Scott A)
New distribtor is installed and performing beautifully. I also went ahead and replaced the coil with a MSD Blaster while I was at it.
Thanks for the replies - you saved me alot of time researching.
Now for some headers :jester
Thanks for the replies - you saved me alot of time researching.
Now for some headers :jester
