just replaced my cd player.....//
Thread Starter
Melting Slicks
Joined: Apr 2001
Posts: 2,280
Likes: 0
From: colorado springs CO
just replaced my cd player.....//
...my volume up button on my sony DIN sized cd player broke.. :cry :cry
just finished replacing it with an alpine cd player..
the alpine's are cool cuase it has these little graphics that make it look like a james bond car :lol: :lol: :lol:
i saw at sound advice today these radios that have NO faceplate controls :eek: :eek:
whats up with that?? :confused: :confused:
and they have these faceplates that have lil motors in em that fold out!! :lol: :lol:
i thought that would look cool in the vette but just spend $220 bux on the alpine CDE-7859 instead...
:cheers: :cheers:
how many of you c3'ers out there have cut your dashes for DIN sized CD players??
i know im not the only one!!
:)
just finished replacing it with an alpine cd player..
the alpine's are cool cuase it has these little graphics that make it look like a james bond car :lol: :lol: :lol:
i saw at sound advice today these radios that have NO faceplate controls :eek: :eek:
whats up with that?? :confused: :confused:
and they have these faceplates that have lil motors in em that fold out!! :lol: :lol:
i thought that would look cool in the vette but just spend $220 bux on the alpine CDE-7859 instead...
:cheers: :cheers:
how many of you c3'ers out there have cut your dashes for DIN sized CD players??
i know im not the only one!!
:)
Thread Starter
Melting Slicks
Joined: Apr 2001
Posts: 2,280
Likes: 0
From: colorado springs CO
Re: just replaced my cd player.....// (Ed T)
no no no!!
i tried the circular saw with a cutting wheel but the @#@#@ing thing didnt fit :lol: :lol: :lol: :lol:
i had to do it slowly with a dremel :rolleyes: :rolleyes:
oh my!!! your gonna have fm now too ehh?? :jester :lol: :lol:
i tried the circular saw with a cutting wheel but the @#@#@ing thing didnt fit :lol: :lol: :lol: :lol:
i had to do it slowly with a dremel :rolleyes: :rolleyes:
oh my!!! your gonna have fm now too ehh?? :jester :lol: :lol:
Race Director
Joined: Apr 1999
Posts: 11,520
Likes: 13
From: CORVETTE 77 385 C.I. TEXAS
Re: just replaced my cd player.....// (daily_driver)
QUOTE]... these radios that have NO faceplate controls :eek: :eek:
whats up with that?? :confused: :confused:
and they have these faceplates that have lil motors in em that fold out!! :lol: :lol:
How many of you c3'ers out there have cut your dashes for DIN sized CD players?? ...
:)[/QUOTE]
Have an 80's gauge cluster trim that someone on the forum sent awhile back. This allows the oil temp. gauge cutout to match the others. Cut it out for a CD/FM, currently no radio. Will put in a Kenwood w/ "no faceplate & the lil motors". :cool:
The disappearing face is supposed to fool some ? that there is no radio & if they take it anyway they need a code to get it to work.
Ya might as well get the pics. ready, they are gonna hit you hard for them.
Which Sony was that? Did you try to get it fixed?
whats up with that?? :confused: :confused:
and they have these faceplates that have lil motors in em that fold out!! :lol: :lol:
How many of you c3'ers out there have cut your dashes for DIN sized CD players?? ...
:)[/QUOTE]
Have an 80's gauge cluster trim that someone on the forum sent awhile back. This allows the oil temp. gauge cutout to match the others. Cut it out for a CD/FM, currently no radio. Will put in a Kenwood w/ "no faceplate & the lil motors". :cool:
The disappearing face is supposed to fool some ? that there is no radio & if they take it anyway they need a code to get it to work.
Ya might as well get the pics. ready, they are gonna hit you hard for them.
Which Sony was that? Did you try to get it fixed?
Team Owner
Joined: Feb 1999
Posts: 29,077
Likes: 0
From: Deep East Texas
Re: just replaced my cd player.....// (Ganey)
Not being an eletronics expert... I've seen guys mention "DIN" units here a few times. What's a "DIN" unit? (May be a dumb question, but inquiring minds want to know. :crazy: )
Thread Starter
Melting Slicks
Joined: Apr 2001
Posts: 2,280
Likes: 0
From: colorado springs CO
Re: just replaced my cd player.....// (Mack76)
it was an old 400 dollar sony unit... i got about 5 years outta it so im happy... :)
a sony cdx 4160
it only need a new volume up button!
but the new alpine is really cool! i find the BBE processor really improves the sound! im thnking about adding a subwoofer now.
yah im too lazy to get an extension cord out for my digital camera.. the stupid thing eats batteries like crazy...
a DIN unit is a standard radio "size"....
the problem with installing a DIN in a corvette is you have to cut the faceplate (its pretty thick!!) and you have to get a custom faceplate made to cover it up nicely... or if you have a radio delete optioned console available i think that would work perfectly!!!
there are also some really cool receivers out right now that have XM satellite service!!
and there are radios that can read MP3 cd's also so you can put ~~150 songs on 1 cd!!!!
i dont like the motorized faceplate radios.... for ~500-700 bux i think ill pass!! its just another thing that can break i suppose...
:cheers:
a sony cdx 4160
it only need a new volume up button!
but the new alpine is really cool! i find the BBE processor really improves the sound! im thnking about adding a subwoofer now.
yah im too lazy to get an extension cord out for my digital camera.. the stupid thing eats batteries like crazy...
a DIN unit is a standard radio "size"....
the problem with installing a DIN in a corvette is you have to cut the faceplate (its pretty thick!!) and you have to get a custom faceplate made to cover it up nicely... or if you have a radio delete optioned console available i think that would work perfectly!!!
there are also some really cool receivers out right now that have XM satellite service!!
and there are radios that can read MP3 cd's also so you can put ~~150 songs on 1 cd!!!!
i dont like the motorized faceplate radios.... for ~500-700 bux i think ill pass!! its just another thing that can break i suppose...
:cheers:
Drifting
Joined: Aug 2001
Posts: 1,708
Likes: 0
From: North Carolina
Re: just replaced my cd player.....// (daily_driver)
daily. I think I have the same alpine in my daily driver. I say that because I spent like $250 for it. It was the "top-of-the-line" alpine at circut city. There where others that cost more, but this was the highest priced alpine...
Anyway, the one with no faceplate that folds down, and the buttons on the back are AWESOME. $350 for one though. Im seriously considering selling mine and buying that one. A friend of mine is selling me his 2 12's and box for $120. The box alone was $100, and the speakers where $140 a peice, and they're still under warranty...Im getting a helluva deal I think.
If I can convince my parents to let me keep the vette, I will get the faceless CD deck, if not I'll keep my alpine for now.
Daniel
Anyway, the one with no faceplate that folds down, and the buttons on the back are AWESOME. $350 for one though. Im seriously considering selling mine and buying that one. A friend of mine is selling me his 2 12's and box for $120. The box alone was $100, and the speakers where $140 a peice, and they're still under warranty...Im getting a helluva deal I think.
If I can convince my parents to let me keep the vette, I will get the faceless CD deck, if not I'll keep my alpine for now.
Daniel
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Burning Brakes
Joined: Jan 2002
Posts: 1,007
Likes: 0
From: many sticks land of mountains
Re: just replaced my cd player.....// (daniel77350)
When I put my Alpine in my '76, I used a dremel tool with a cutting wheel.
It took 3 wheels to do the job. That aluminum is a lot tougher than I thought.
Make sure that you wear eye protection and some type of breathing mask.
There is a tremendous amount of metal dust.
It will also go a lot smoother if you remove the center guage bezel to do the
job. There are reinforced areas behind there, so you're not dealing with the
same thickness all the way along.
good luck, and enjoy.
TJ :yesnod:
It took 3 wheels to do the job. That aluminum is a lot tougher than I thought.
Make sure that you wear eye protection and some type of breathing mask.
There is a tremendous amount of metal dust.
It will also go a lot smoother if you remove the center guage bezel to do the
job. There are reinforced areas behind there, so you're not dealing with the
same thickness all the way along.
good luck, and enjoy.
TJ :yesnod:
Race Director
Joined: Apr 1999
Posts: 11,520
Likes: 13
From: CORVETTE 77 385 C.I. TEXAS
Re: just replaced my cd player.....// (daily_driver)
There is a small saw called a coping saw that works good to cut out the opening at least on the late ones. The angle of the blade adjusts.
Mack
A DIN unit fits a standard rectangular opening about 2 x 7. Most aftermarket CD head units are DIN.
Mack
A DIN unit fits a standard rectangular opening about 2 x 7. Most aftermarket CD head units are DIN.
Thread Starter
Melting Slicks
Joined: Apr 2001
Posts: 2,280
Likes: 0
From: colorado springs CO
Re: just replaced my cd player.....// (Ganey)
a question for you guys....
does a cd changer that works over FM have less sound quality (sampling) than a cd changer that connects directly to the head unit??
cuase i bought the alpine without the cd changer control....
and i plan to buy a cd changer with FM output......
thanks
:cheers:
does a cd changer that works over FM have less sound quality (sampling) than a cd changer that connects directly to the head unit??
cuase i bought the alpine without the cd changer control....
and i plan to buy a cd changer with FM output......
thanks
:cheers:
Drifting
Joined: Aug 2001
Posts: 1,708
Likes: 0
From: North Carolina
Re: just replaced my cd player.....// (daily_driver)
I don't like changers, I don't see the point in them. Changing a CD at a stop light is not that hard. not to mention you always have to change CD's in the cartridge unless you only own 6 CD's that you listen to.
Daniel
Daniel
Thread Starter
Melting Slicks
Joined: Apr 2001
Posts: 2,280
Likes: 0
From: colorado springs CO
Re: just replaced my cd player.....// (daniel77350)
daniel, i MAKE my own cd's !!!! that way i like every song on the CD (about 15 songs to a cd....) multiply that by 12 cd's in a cd changer and you have 14 hours straight of all songs you love!!!
yah ok i admit it..
i steal music from the internet and burn em to cdr's...
i dont see the point of paying 15 bux per cd when i only like 1 song on em!!
:lol: :lol: :lol:
:blueangel: :blueangel: :blueangel:
nobody should own music anyways!!
yah ok i admit it..
i steal music from the internet and burn em to cdr's...
i dont see the point of paying 15 bux per cd when i only like 1 song on em!!
:lol: :lol: :lol:
:blueangel: :blueangel: :blueangel:
nobody should own music anyways!!
Drifting
Joined: Aug 2001
Posts: 1,708
Likes: 0
From: North Carolina
Re: just replaced my cd player.....// (daily_driver)
that is true...I too burn my CD's, but I don't mix them, I just burn copies of complete CD's I like. Im not much of a CD "skipper"...I have a bad habbit of listening to one straight through, or at least until the song I like, then I'll change it out.. I mean I guess I can see a CD changer, but I don't see how one would make my life better....expecally considering the price of the things...
Daniel
Daniel
Thread Starter
Melting Slicks
Joined: Apr 2001
Posts: 2,280
Likes: 0
From: colorado springs CO
Re: just replaced my cd player.....// (daniel77350)
well the FM output ones are as cheap as $89 dollars!!! (thats for the cheaparse brand KOSS)...
a decent one is ~$189 being a sony or pioneer or JVC..
i think im leaning torwards a JVC...
dunno yet..
im just wondering if itll be true CD quality sound since its output goes over FM???
maybe i shoulda sprang for the more expensive radio with the cd controller on it....
:cry
a decent one is ~$189 being a sony or pioneer or JVC..
i think im leaning torwards a JVC...
dunno yet..
im just wondering if itll be true CD quality sound since its output goes over FM???
maybe i shoulda sprang for the more expensive radio with the cd controller on it....
:cry
Race Director
Joined: Apr 1999
Posts: 11,520
Likes: 13
From: CORVETTE 77 385 C.I. TEXAS
Re: just replaced my cd player.....// (daily_driver)
Think about this- which sounds better CD or FM. Rec. directly connected instead of the fm. You might be able to upgrade to the CD changer control HU.
I don't have a changer in either Hot Rod & no plans to, do have 1 in the house.
:cheers:
I don't have a changer in either Hot Rod & no plans to, do have 1 in the house.
:cheers:
Drifting
Joined: Aug 2001
Posts: 1,708
Likes: 0
From: North Carolina
Re: just replaced my cd player.....// (daily_driver)
my bro had one in his truck(I installed it). I can't really remember how it sounded, because it was about a year and a half ago. But if memory serves me, it'll sound like a regular CD. I think where the poor FM quality comes from is somewhere between the radio DJ and your antenna. The CD unit goes between antenna and deck. I think its almost as good as a regular CD player, but not quite as good as the indash.
I want one of those radios that has the screen that pops out, and has a touch screen. Those are awesome, but $1,700,...
Daniel
I want one of those radios that has the screen that pops out, and has a touch screen. Those are awesome, but $1,700,...
Daniel
Drifting
Joined: Aug 2000
Posts: 1,758
Likes: 4
From: Medford, Or
Re: just replaced my cd player.....// (daily_driver)
I was able to find a used '76 console at a Corvette parts store with a hole already professionally cut. I also just installed a new Blaupunkt San Jose CD/MP3 player in my C3. MP3 format is awesome. I can average 150 songs on one disc.
Dan
Dan
