1976 Steering column problems
Thread Starter
2nd Gear
Joined: Nov 2008
Posts: 2
Likes: 0
From: oxford massachusetts
1976 Steering column problems
I am having a difficult time rebuilding my steering column. Right now I have 2. One is junk and has been welded the other is missing parts. The best I can get it will have the horn either not go off at all even when pushed or on all the time as soon as it is placed on. If anyone has an exploded diagram or directions on the assembly with pictures that would be an huge help.
Instructor
Joined: Jan 2005
Posts: 152
Likes: 0
From: Denver Colorado
The 76 has a unique wheel and column combo. (The Vega Wheel ) I used pieces from my 76 stock horn button and a grant hub and horn button kit to get mine working. I also changed the wheel to a grant wheel but most of their wheels dont fit with out cobbling up a mix of stock and aftermarket parts. Your best bet is get rid of the 76 column and get a tilt from just about any other year, then horn kits, hubs and wheels fit like a breeze.
Le Mans Master
Joined: Jul 2000
Posts: 6,001
Likes: 112
From: Saginaw Michigan
T&T column or standard (non-adjustable) type? I have several papers and pictures at www.corvettefaq.com under Jim Shea's Steering Papers
The actual 1976 steering columns are the same as 1969 through 1975. The things that are different are the steering wheels, horn parts, and adapters.
Jim
The actual 1976 steering columns are the same as 1969 through 1975. The things that are different are the steering wheels, horn parts, and adapters.
Jim
Racer
Joined: Jan 2007
Posts: 385
Likes: 3
From: RTP NC
I am having a difficult time rebuilding my steering column. Right now I have 2. One is junk and has been welded the other is missing parts. The best I can get it will have the horn either not go off at all even when pushed or on all the time as soon as it is placed on. If anyone has an exploded diagram or directions on the assembly with pictures that would be an huge help.
http://s189.photobucket.com/albums/z...eel%20removal/
