350 Starters
Thread Starter
Burning Brakes
Joined: Dec 2005
Posts: 992
Likes: 56
From: Baldwinsville, NY
350 Starters
What is the difference between these two:
http://picasaweb.google.com/mikepthr...70084814108322
http://picasaweb.google.com/mikepthr...68684704531058
The old school one on my 78 has stagared bolts, are there holes for the mini unit, they seem to be in-line with each other?
http://picasaweb.google.com/mikepthr...70084814108322
http://picasaweb.google.com/mikepthr...68684704531058
The old school one on my 78 has stagared bolts, are there holes for the mini unit, they seem to be in-line with each other?
Melting Slicks
Joined: Oct 2002
Posts: 2,317
Likes: 111
From: St Louis MO
Usually there are 3 bolt holes in the block. If the starter nose has bolts inline, it goes with the 12.88 inch diameter flywheel/flexplate. If the bolts are staggered, it fits the larger 14 inch flywheel/flexplate. In the case of the aftermarket high torque starter with 4 bolt holes inline, pick the appropriate pair to make it match your flywheel.
