? on Grease (Zerk) fitting on Steering Control Valve
Thread Starter
Drifting
Joined: Mar 2001
Posts: 1,411
Likes: 2
From: St. Louis, Missouri
? on Grease (Zerk) fitting on Steering Control Valve
Does this thing get lubed up like the rest of the steering system?
Does it use the same grease as the rest of the steering/suspension?
Does it use the same grease as the rest of the steering/suspension?
Burning Brakes
Joined: Dec 2000
Posts: 1,183
Likes: 2
From: Des Moines Iowa
Re: ? on Grease (Zerk) fitting on Steering Control Valve (Neo Fender)
This should get just a couple of pumgs of chassis grease and be good for a long time, don't over grease this zerk. Many members have greased, then removed the zerk, to avoid anywone else pumping too much grease in there. I think grease is just to 'hold' seal and keep dirt and water from getting in there.
I use Mobile 1 synthetic chassis grease on all of my suspension and this control valve.
I use Mobile 1 synthetic chassis grease on all of my suspension and this control valve.
