half shaft u-joints
Melting Slicks
Joined: Aug 2005
Posts: 2,683
Likes: 34
From: Working on the car NY
I couldn't see a shop doing this for (much) less than $350 if they do the complete job and use 1st quality u-joints at least in my area. Most shops in the NY metro area are going to be charging $100/hr labor. In any event, I'd recommend if you do the job yourself, to use your original half shafts and mark what side of the car they came off. I had mucho problemo's when I went to 3" shafts cause they were too long
. Of course, I didn't see fit to measure them when I received them and only noticed they were screwed up after I put them in and the wheels were all towed in
. And careful, don't bend that flange
.
. Of course, I didn't see fit to measure them when I received them and only noticed they were screwed up after I put them in and the wheels were all towed in. And careful, don't bend that flange.
Last edited by TWINRAY; Mar 30, 2009 at 01:20 PM.
Pro
Joined: Jul 2008
Posts: 699
Likes: 3
From: Millersville, MD
If you are interested in doing this yourself we sell both the axles and spicer U-Joints
Corvette Half Axles
1963 - 1979
Greaseable List $165.00 Your price $95.00 +S&H
Spicer Solid List $195.00 Your price $120.00 +S&H
Add The Flange List $81.42 Your price $40.71
Some of your U-Joints are online here
If you don't see the U-Joint you need give us a call 630-513-9292
As you can see from our prices we seem to beat everyone that we've come across.
Corvette Half Axles
1963 - 1979
Greaseable List $165.00 Your price $95.00 +S&H
Spicer Solid List $195.00 Your price $120.00 +S&H
Add The Flange List $81.42 Your price $40.71
Some of your U-Joints are online here
If you don't see the U-Joint you need give us a call 630-513-9292
As you can see from our prices we seem to beat everyone that we've come across.
Cruising
Joined: Nov 2004
Posts: 12
Likes: 0
Hey guys it has been some time but I need your help.
If I remember back in my vette days 74-79 had 3" half shafts?
Also, do you know if that year had 1350 yokes on them? If not did any year?
If they have 1350's I need a used set which I can cut up for my project.
Thanks,
John
If I remember back in my vette days 74-79 had 3" half shafts?
Also, do you know if that year had 1350 yokes on them? If not did any year?
If they have 1350's I need a used set which I can cut up for my project.
Thanks,
John
