SPIRALTURBOBAFFLES Website down!
Thread Starter
Team Owner
Joined: Jul 2001
Posts: 182,997
Likes: 88
From: Lakeland, FL
Cruise-In IV-V-VI-VII-VIII Veteran
St. Jude Donor '03, '06, '17
SPIRALTURBOBAFFLES Website down!
Today I tried several times to access the SPIRALTURBOBAFFLES Webpage. It seems that the page is down.
I have some questions about those mufflers. How are they fixed inside in the pipe? welding? riveting?
Olivier
I have some questions about those mufflers. How are they fixed inside in the pipe? welding? riveting?
Olivier
Race Director
Joined: Feb 1999
Posts: 16,978
Likes: 7
From: In Dreams There Is Truth Ohio
Re: SPIRALTURBOBAFFLES Website down! (GrandSportC3)
The spiral tubes are bolted using a 1/4" bolt. collector has to have two holes drilled for bolts to slide inside the collector
Safety Car
Joined: Sep 2000
Posts: 4,679
Likes: 6
From: Charles Town WV
Re: SPIRALTURBOBAFFLES Website down! (GrandSportC3)
Grandsport, I have to ask, how do you get to the engine in that car? It looks like the nose would hit the ground if it was a tilt up front end. I can't figure it out.
Thread Starter
Team Owner
Joined: Jul 2001
Posts: 182,997
Likes: 88
From: Lakeland, FL
Cruise-In IV-V-VI-VII-VIII Veteran
St. Jude Donor '03, '06, '17
Re: SPIRALTURBOBAFFLES Website down! (Steve Straus)
>>Grandsport, I have to ask, how do you get to the engine in that car?
>>It looks like the nose would hit the ground if it was a tilt up front end.
>>I can't figure it out.
The front bumper is approx.1 inch above ground when the hood is open.
At the moment I cannot access my homepage to upload some pictures where you can see the
front with the hood open!
Olivier
>>It looks like the nose would hit the ground if it was a tilt up front end.
>>I can't figure it out.
The front bumper is approx.1 inch above ground when the hood is open.
At the moment I cannot access my homepage to upload some pictures where you can see the
front with the hood open!
Olivier
C6 the C5 of tomorrow
Joined: Nov 2000
Posts: 6,665
Likes: 2
From: Twin Cities Minnesota
Re: SPIRALTURBOBAFFLES Website down! (JCL)
JCL
So mufflers for my side exhaust system are finally reaching the top of my prioity list, so I'm wondering how to get your baffled system under the stock covers.
I currently have a 3" system with flanges so I can remove the muffler.
I also have 3 1/2" homemade glasspacks with 2 1/2" cores that flow well, but are too loud for anything other than dragracing.
Do you have anything like a big glasspack that would fit under the stock covers and I could weld a flange to?
OR
Do you have baffles that would fit into a 3 1/2" pipe?
So mufflers for my side exhaust system are finally reaching the top of my prioity list, so I'm wondering how to get your baffled system under the stock covers.
I currently have a 3" system with flanges so I can remove the muffler.
I also have 3 1/2" homemade glasspacks with 2 1/2" cores that flow well, but are too loud for anything other than dragracing.
Do you have anything like a big glasspack that would fit under the stock covers and I could weld a flange to?
OR
Do you have baffles that would fit into a 3 1/2" pipe?
Burning Brakes
Joined: Jul 2001
Posts: 831
Likes: 0
From: Reston VA
Re: SPIRALTURBOBAFFLES Website down! (JCL)
JCL, glad to see your up and running again. I was gonna get hot if someone trashed my web. :yesnod:
Finally going to be starting my car in the next couple of weeks. Baffles are installed and look great.
Plan on adding me to your customer referral section.
Finally going to be starting my car in the next couple of weeks. Baffles are installed and look great.
Plan on adding me to your customer referral section.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Burning Brakes
Joined: Nov 2000
Posts: 948
Likes: 0
From: Johnston Iowa
Re: SPIRALTURBOBAFFLES Website down! (ScubaJKD)
JCL, Sent out the money order the day before yesterday for the baffles.
You should see it in a couple of day....
Getting closer to many hearing this thing someday.
:cheers:
You should see it in a couple of day....
Getting closer to many hearing this thing someday.
:cheers:
Safety Car
Joined: Jan 2001
Posts: 3,569
Likes: 1
From: Hawaii
Re: SPIRALTURBOBAFFLES Website down! (GrandSportC3)
At the moment I cannot access my homepage to upload some pictures where you can see the
front with the hood open!
front with the hood open!
Burning Brakes
Joined: Feb 2001
Posts: 854
Likes: 0
Re: SPIRALTURBOBAFFLES Website down! (ScubaJKD)
ScubaJKD (Bryan) This is not the time for that to be down. I think everyone who has or wants sidepipes and baffles, found me this week. It's been non- stop. Thanks bryan and yes you are on the list. Did Brantly Farris get ahold of you about the baffles. Gave him your e-mail. I think he wanted to hear yours if it was up and running. He also has a 69 with a "383". Thanks, JIM (JCL) :cool: :cool: :chevy
Burning Brakes
Joined: Jul 2001
Posts: 831
Likes: 0
From: Reston VA
Re: SPIRALTURBOBAFFLES Website down! (JCL)
JCL, tell him to give me a shout. I should be up and running in the next couple of weeks keeping fingers crossed. Right now I am polishing out the engine with all the polished goodies. Then slapping on carb, stabbing msd dsitributor and so forth. Should not be long now I am dieing to hear my new baffles. Check out the website for the latest status. I am rooting for you everyone should have saidepipes and your baffles.
:cheers:
:cheers: