Cam Identification
Thread Starter
Instructor
Joined: Oct 2000
Posts: 111
Likes: 0
From: HOUSTON , TEXAS , USA
Cam Identification
Removed cam this morning. I am trying to identify if stock cam or not. Does not have any markings on either end. Between the lobes has these:
CWC
1529
C12
D12
15
Any ideal?
CWC
1529
C12
D12
15
Any ideal?
Safety Car
Joined: Apr 2001
Posts: 4,795
Likes: 1
From: Regina Saskatchewan, Canada.
Re: Cam Identification (CORKYVET)
Hmmm, that's a tough one. I'm not one for numbers but the only way I can think of figuring the specs are to take it to a machine shop and have them use a dial indicator. If the lobes are worn you could get an inaccurate reading.
Race Director
Joined: Oct 2000
Posts: 15,052
Likes: 79
From: central FL, near the beach.
Re: Cam Identification (CORKYVET)
the best way to check out a cam is with a CAM DOCTOR machine.
but, in this case, i suggest you throw it away, order 2 or 3 cams based on the various advice, try each one and see what you like best.
when you install, check specs against the cam card, using a dial indicator and a degree wheel.
but, in this case, i suggest you throw it away, order 2 or 3 cams based on the various advice, try each one and see what you like best.
when you install, check specs against the cam card, using a dial indicator and a degree wheel.
