My engine assembly experience and help needed
Thread Starter
Pro
Joined: Jun 2001
Posts: 579
Likes: 0
From: Pflugerville/ Colllege Station TX
My engine assembly experience and help needed
I have 7 of my 8 pistons in my engine for 2 reasons. One my machine shop set up 5 of my rods to go on one side of the block and 3 to go on the other. :mad The other reason being that i broke a ring. If you are going to put rings on pistons get a ring expander its definatly worth it. Is there anywhere that i can get just one ring? :cry Every thing else has gone smoothly i should be driving my car again by next weekend no problem. :)
[Modified by Jester69Stingray, 11:45 AM 2/4/2002]
[Modified by Jester69Stingray, 11:45 AM 2/4/2002]
Le Mans Master
Joined: Apr 1999
Posts: 6,134
Likes: 46
From: Raleigh North Carolina
Re: My engine assembly experience and help needed (Jester69Stingray)
You can order single rings from any manufacturer/supplier... just call them up and tell them what set you have and they should be able to hook you up no problem. However.... some places charge almost as much for a single ring as for a full set, so be forewarned.
