Nearly finished engine rebuild.....pic.
Thread Starter
Racer
Joined: Nov 2000
Posts: 320
Likes: 0
From: Warrington England
Nearly finished engine rebuild.....pic.
Just thought I would share with you my joy on finishing the rebuild on my '81. Although I have thoughrally enjoyed the experience it's still nice to see a light at the end of the tunnel. Apart from adding '72 heads I've replaced the cam, all bearings, piston rings etc.and added a roller timing set. I've had the heads and the block decked.Just need to buy myself an alluminium water pump and chrome fuel pump and it's job done ! :cool:VettePaul. 
Thread Starter
Racer
Joined: Nov 2000
Posts: 320
Likes: 0
From: Warrington England
Re: Nearly finished engine rebuild.....pic. (Alwyn678)
:cheers:Guys. Alwyn678, The numbers on the heads are 3998920. Not quiet sure about much else. They must be better than stock '81 heads though eh ? VettePaul. :D
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
