Pushrod problem
Thread Starter
Intermediate
Joined: Feb 2009
Posts: 41
Likes: 0
From: Bartlesville Oklahoma
Pushrod problem
I've got about 200 miles on my new engine so I pulled the valve covers to readjust the lifters and found that where the pushrods go through the guide plates there is damage to the pushrods, it actually has rubbed into them. I have a roller cam and rockers, the pushrods do not feel tight in the guide plates and the geometery looks to be fine. The pushrods are the stock ones. What would cause this and how do I correct it?
