Does this combo sound OK?
Thread Starter
Intermediate
Joined: Jun 2008
Posts: 32
Likes: 0
From: brandywine Maryland
Does this combo sound OK?
355 block,flat top pistons, Comp Cam xe274h-10, comp cam 1.52 roller tip rockers, professional products air gap intake,pro topline iron heads 202/160 180 exaust, 200r4 trans with 2200 stall.3.70 rear. I have everything except the rear.Does anyone see any problems Thanks in advance BDW.
Last edited by bdw3031; Jul 19, 2009 at 03:10 AM.
Instructor
Joined: Jul 2009
Posts: 106
Likes: 0
From: Thompson Falls MT
I have been looking into something similar for myself and all I can say is look into what pistons you want. This will help control the compression ratio if you are looking for high or moderate, also if you plan on further mods down the line. Things like NOS, turbo, supercharger etc... I am looking at a flat top piston which as far as I can tell is a pretty good/versital piston for naturally aspired power. There are also improvements you can add when having your motor assembled like, port/polish or blueprinting. These things will improve the life and reliability of your new motor-so I understand anyway. I am pretty new to this so take what I say as suggestion, not fact, thanks
Le Mans Master
Joined: Jun 2004
Posts: 6,231
Likes: 65
From: Seattle WA
St. Jude Donor '14
I'm really not sure what you're asking here...there's not enough detail to give feedback on the build without a lot more detail and some idea of what you're going to use the 'Vette for...
