HEADER CHOICES
Thread Starter
Racer
Joined: Jan 2001
Posts: 334
Likes: 1
From: Averill Park N.Y.
HEADER CHOICES
Apparently the 3 choices are Dynomax, Hedman, & Hooker.
Do all 3 manufacturers use the same thickness flange. I think this could be an important consideration to prevent leakage.
Do all 3 manufacturers use the same thickness flange. I think this could be an important consideration to prevent leakage.
Burning Brakes
Joined: Aug 2001
Posts: 1,002
Likes: 0
From: Bay City MI.
Re: HEADER CHOICES (Ken74Conv)
I was looking at Hookers for my big block, but was told the jet coating was not so good. I got on to Sanderson headers and they make an awesome product and they are made in the USA!!!! They are block hugger style with 16 gage tubes and 3" collector. Good people to talk to and very helpfull. My BB5 headers cost $435 with the Jet hot coating on, check them out! http://www.sandersonheaders.com Good luck!
Burning Brakes
Joined: Apr 2001
Posts: 789
Likes: 0
From: East Providence RI
Re: HEADER CHOICES (467-Ratman)
I was looking at Hookers for my big block, but was told the jet coating was not so good. I got on to Sanderson headers
