Dead Gauges
Thread Starter
Cruising
Joined: May 2000
Posts: 14
Likes: 0
From: McLean, VA, USA
Dead Gauges
JUst finished restoring my interior.. looks great.. I did remove protions of the dash .. but left all wiring harnesses intact.....
Take the car out and the water temp and fule gages are dead.... fuse appears to be ok.... so any ideas on what might cuase this specific failure? Before I start ripping the dash apart I want a good game plan.. I figure that there is a loose wire connection somewhere...... Thanks.
Take the car out and the water temp and fule gages are dead.... fuse appears to be ok.... so any ideas on what might cuase this specific failure? Before I start ripping the dash apart I want a good game plan.. I figure that there is a loose wire connection somewhere...... Thanks.
Advanced
Joined: Feb 1999
Posts: 84
Likes: 0
From: brownwood, tx
Re: Dead Gauges (briang)
As mentioned above, I believe its the main plug at the back of the console is not making good contact. With the engine running, reach back there and give it a little wiggle. I bet they'll jump back to life.
