Trying to identify distributor
Le Mans Master
Joined: Oct 2002
Posts: 7,098
Likes: 378
From: Las Vegas - Just stop perpetuating myths please.
That's not a good number for Chevy.
There are plenty of Chevy numbers close to that 1112866 in the '74 & '75 cars & trucks both BB and sb. You need to look at the number again as there are no Chevy matches. If that is a correct number then not a Chevy.
What did the distributor come out of?
cardo0
What did the distributor come out of?
cardo0
Burning Brakes
Joined: May 2006
Posts: 774
Likes: 1
From: Round Rock Texas
Yes, everything came off my 76 Corvette motor. The distributor is an HEI. The cap did not come with it because I used it. Don't know what you are trying to infer, but I assure you I only had the 75 and the 76 I sold. I replaced both motors with new motors and everything I have is off both of those motors. So...let's not get too get too out of hand here. I am not that kind of guy.
If you have a problem why not pm me instead of, what seems to me, trashing me. If I am misreading this I apologize, but this is how it looks to me.
If you have a problem why not pm me instead of, what seems to me, trashing me. If I am misreading this I apologize, but this is how it looks to me.
Last edited by marz; Dec 26, 2009 at 07:24 PM.
Thread Starter
Pro
Joined: May 2007
Posts: 593
Likes: 0
From: Warrenville IL
Marz, not trying to infer anything. Sorry if you were offended. I'm just trying to identify the distributor as I couldn't do it easily.
I was able to identify the exact casting and dates on the starter as the stock starter used in the early 70's on 350 SB Automatics dated for late '74 production. Which matches your application exactly.
Just couldn't find the same information on that distributor casting number.
I was able to identify the exact casting and dates on the starter as the stock starter used in the early 70's on 350 SB Automatics dated for late '74 production. Which matches your application exactly.
Just couldn't find the same information on that distributor casting number.
Last edited by wjsullivan; Dec 26, 2009 at 07:39 PM.
