Help Once Again!!!
Thread Starter
Safety Car
Joined: Mar 2009
Posts: 3,558
Likes: 4
From: Oakland California
Help Once Again!!!
OK, I some more help, this time figuring which brake lines go where on the proportion valve on my '74 L82 vette. It's been a while and I forgot where each line goes on the prop. valve, with the exception of the front to rear line. can anybody help me out. Thank you Here is a pic:
Le Mans Master
Joined: Mar 2001
Posts: 6,640
Likes: 287
From: Ann Arbor Michigan
If you have the correct (OE style) tubes, they will only go on one way since the inlet threads on the proportioning valve are different sizes. The front chamber of the M/C goes to the forward most port (the one on the right top in your photo) and the rear chamber of M/C goes to the rear port. Also, the 1/4" tube goes to the rear and the 3/16" tube goes to the front.
Gary
Gary
Last edited by Duke94; Dec 31, 2009 at 03:03 PM.
Melting Slicks
Joined: Feb 2007
Posts: 2,136
Likes: 62
From: West Kingston RI
That looks the same as my 75 in which case the bottom one goes to front right (passenger wheel), top front goes to drivers wheel, middle top to front chamber on master cylinder and rear top to rear chamber on master cylinder. Happy New Year.
