Power steering centering setup question
Thread Starter
Le Mans Master
Joined: Apr 2001
Posts: 5,000
Likes: 1
From: Minneapolis, Mn USA
Power steering centering setup question
What was the fix again for when the OEM power steering pulls the steering wheel super hard after being re-assembled.
I think it is the ram centering procedure. I dont have any info on that. Is there any wisdom that can be followed for the centering procedure?
This is not for my car, but someone elses. I've got R&P.
Appreciate any responses.
Brent.
I think it is the ram centering procedure. I dont have any info on that. Is there any wisdom that can be followed for the centering procedure?
This is not for my car, but someone elses. I've got R&P.
Appreciate any responses.
Brent.
Intermediate
Joined: Dec 2009
Posts: 41
Likes: 0
Mine did that right after I added PS fluid and put a belt on it (it came without either when we bought it). Kind of freaked me out until I did a little digging. The PS control valve needed to be tweaked just a bit. I'll look for the link and post....
Intermediate
Joined: Dec 2009
Posts: 41
Likes: 0
Here's the procedure http://willcoxcorvette.com/instructions/POWER_STEERING_VALVE_ADJUSTMENT.pdf
There is another link with photos but all of the info is here.
Please heed the warning about starting the car with the front end suspended. That wheel takes off in a hurry!
There is another link with photos but all of the info is here.
Please heed the warning about starting the car with the front end suspended. That wheel takes off in a hurry!
Last edited by Bo5co; Jan 15, 2010 at 12:58 PM.
