Torque Specs
Thread Starter
Racer
Joined: Oct 2006
Posts: 388
Likes: 3
From: Guyton, (Savannah) Georgia
Torque Specs
I want to see if anyone has the torque specs, (and where they found them) of the front spindle steering arm bolts and upper caliper (and backing plate) mount bolt. Thanks.
Intermediate
Joined: Nov 2009
Posts: 30
Likes: 0
From: Winthrop MA
Torque Specs
In the 1966-1982 Shop Manual; Section 15-14;
Front Suspension
Front Suspension
Stud to control arm nuts..............20 lb-ft
Lower Forging nuts............ 40 lb-ft
Upper Control arm attaching nuts............. 50 lb-ft
Collar Bolts................................... ........ 40 lb-ft
Brake anchor bolts....... 120 lb-ft
Lower control arm cross shaft bolts..... front 70 lb-ft
........................................ ........... rear 95 lb-ft
Shock absorber............................ upper 90 lb-in
........................................ .........lower 150 lb-in
Is this what you are looking for?
Lower Forging nuts............ 40 lb-ft
Upper Control arm attaching nuts............. 50 lb-ft
Collar Bolts................................... ........ 40 lb-ft
Brake anchor bolts....... 120 lb-ft
Lower control arm cross shaft bolts..... front 70 lb-ft
........................................ ........... rear 95 lb-ft
Shock absorber............................ upper 90 lb-in
........................................ .........lower 150 lb-in
Burning Brakes
Joined: Dec 2008
Posts: 971
Likes: 45
From: Middlesex NJ
I have these from VBandP
http://www.vbandp.com/instructions/torque%20specs.pdf
I also have this book at home. Lots of info and specs. Has all the specs your looking for.
http://www.amazon.com/Rebuild-Corvet.../dp/076033014X
http://www.vbandp.com/instructions/torque%20specs.pdf
I also have this book at home. Lots of info and specs. Has all the specs your looking for.
http://www.amazon.com/Rebuild-Corvet.../dp/076033014X
