electric fan set up
Thread Starter
Instructor
Joined: Nov 2009
Posts: 190
Likes: 0
electric fan set up
Need advice on electric fan set up for a zz502/auto install. i have two 12" 1360 cfm spal fans and a 3 core alum radiator. I live in south florida so heat is an issue. It will be for street use. Which relay harness should I use (painless etc) and at what temp settings.
thanks
thanks
Le Mans Master
Joined: Dec 2006
Posts: 5,557
Likes: 9
From: Oquirrh Mountains
St. Jude Donor '09
Delta Current Controller is what I run, the FK-50P controller:
http://www.dccontrol.com/fancontrol.htm
If you run it off the starter solenoid, make sure & order it with the surge protector:
http://www.dccontrol.com/componentsR1.htm
http://www.dccontrol.com/fancontrol.htm
If you run it off the starter solenoid, make sure & order it with the surge protector:
http://www.dccontrol.com/componentsR1.htm
ToolMan
Joined: Mar 2006
Posts: 71
Likes: 0
From: Magnolia Texas
I talked to the Spal folks at SEMA and saw this controller. I put one on my car and really like it. You can choose when it turns on and off plus there are relays provided. On my 383 a/c vette in Texas I have one fan come on at 180, the second at 200. The engine always stays in that range. When the a/c comes on, both fans turn on. Good Luck.
http://www.spalusa.com/store/Main.aspx?html=pwmv3
http://www.spalusa.com/store/Main.aspx?html=pwmv3
