Dart SHP engine combs
Thread Starter
Melting Slicks
Joined: Dec 2007
Posts: 2,662
Likes: 14
From: Olivia mn
Dart SHP engine combs
Hey everybody, I would like to know if anyone has used a Dart SHP short block as a starting point for an engine build. Looking at the 400 cubic inch version. What did you think of it?
What engine combinations would work well. looking at 9.5 to 10.1 compression and a cam that has enough vacum to be streetable but still have a nice lope at idle. looking for about 450 hp at the crank.
The car has 3.08 rear end and a turbo 400, would like to get recommendations on a torque converter as well.
Thanks guys, Kubesh
What engine combinations would work well. looking at 9.5 to 10.1 compression and a cam that has enough vacum to be streetable but still have a nice lope at idle. looking for about 450 hp at the crank.
The car has 3.08 rear end and a turbo 400, would like to get recommendations on a torque converter as well.
Thanks guys, Kubesh
