Taking out blown Diff, have a question.
The rest is easy sauce. 
Melting Slicks
Joined: Oct 2002
Posts: 2,317
Likes: 111
From: St Louis MO
Congrats on the success.
I've had good luck with using 2 crowbars... Position one forward and one aft of the bushing center and lever it apart. It also helps to keep the center bolt in but loosen it by about 1/8 inch to keep the cross member from falling when it lets loose.
I've had good luck with using 2 crowbars... Position one forward and one aft of the bushing center and lever it apart. It also helps to keep the center bolt in but loosen it by about 1/8 inch to keep the cross member from falling when it lets loose.
