Balancing Torque Thrust II's
Thread Starter
Pro
Joined: Aug 2000
Posts: 713
Likes: 1
From: plymouth mass
Balancing Torque Thrust II's
How have you guys made out balancing these wheels? Should I put weights on both outer and inner , just inner or use center line stick ons? The center line stick ons might not clear the caliper. I think this topic (TT II's )has been beat to death, so hopefully this will be it.
Le Mans Master
Joined: Apr 2000
Posts: 7,562
Likes: 9
From: B'Ville NY
Cruise-In III Veteran
St. Jude Donor '05
Re: Balancing Torque Thrust II's (charles dion)
They were able to balance mine all from the inside. Sometimes if you can't get a wheel to balance, you can rotate the tire 180` then try balancing again :cheers: .
Thread Starter
Pro
Joined: Aug 2000
Posts: 713
Likes: 1
From: plymouth mass
Re: Balancing Torque Thrust II's (73 LS-4)
Thanks guys, I think I'am going to try the all weight on the inside since the caliper clearance is so close on the center of the rim. As always, this forum is a great tool. I must add there are some nice looking 73 and 74 vettes on this forum , I am partial to 73's.
[Modified by charles dion, 7:20 PM 4/7/2002]
[Modified by charles dion, 7:20 PM 4/7/2002]
