Power Window Switch Connector Wiring???
Thread Starter
Melting Slicks
Joined: May 2006
Posts: 2,590
Likes: 403
From: Nashville TN
St. Jude Donor '09
Power Window Switch Connector Wiring???
My goal this winter is to work on fixing my electrical issues. While I have the console out, I though I'd look at an intermittent issue with power window switch. When I got to the switch connector, I saw the exposed wiring -- this can't be good. How do you fix this? I saw a pigtail in an old YearOne catalog, but was wondering how others have repaired theirs.
Race Director
Joined: May 2006
Posts: 16,528
Likes: 53
From: Dayton, Ohio
The easiest way is to just replace the window and lock pigtails. Not sure what year but if you have power locks ,replace the lock switches as well.
http://willcoxcorvette.com/advanced_...igtail&x=0&y=0
http://willcoxcorvette.com/advanced_...igtail&x=0&y=0
Thread Starter
Melting Slicks
Joined: May 2006
Posts: 2,590
Likes: 403
From: Nashville TN
St. Jude Donor '09
Thanks Roger . . . I think that is the route I'll take. I looked on the Willcox site but could not find when I searched on Power Window. Worked when I searched Pigtail. Thanks for pointing me in the right direction; I'll get an order to Willcox -- got to replace tach board too.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,853
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
And if you need it.. I have a schematic on the site you can upload..
http://willcoxcorvette.com/repairand...lp.php?hID=207
Roger.. I will check that fuel gauge thing tomorrow for you too..
http://willcoxcorvette.com/repairand...lp.php?hID=207
Roger.. I will check that fuel gauge thing tomorrow for you too..
