71 L-88 Replica (kinda)
#81
Melting Slicks
Thread Starter
New year, new hope, Jeff Leech from Mid America Ind said my car will be ready this month. I will keep my fingers crossed. I am leaning twds the LSX 454/620hp motor and probably FI. Again the longer I have to think about it the more options I come up with. I have not really received any good feedback on Blue Print Engines so I do not want to be the first one to test them.
Last edited by vstol; 01-01-2013 at 10:50 AM.
#83
Melting Slicks
Thread Starter
Actually the frame and every thing is complete as of yesterday and ready to ship back to me. Its been way too long. I was trying to upload some pictures via photo bucket but they have changed it since I last posted and its kicking my butt. Working it
#84
Melting Slicks
Thread Starter
Its taken 2 1/2 yrs for the 6 month project to be completed and it looks like I will have it shipped home around the 29th of this month. I have posted some pics of the frame on my site below, the center and side sections will be beefed up some.
http://s152.photobucket.com/user/vst...L-88%20Replica
http://s152.photobucket.com/user/vst...L-88%20Replica
#88
Intermediate
Member Since: Sep 2012
Location: Tri Cities WA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
The following users liked this post:
MISTERZ06 (05-25-2017)
#92
Burning Brakes
What size fuel cell are you using? Is that the height it will set? It seems like it sets very low. Better for keeping the weight low but would be concerned that it would hit. Is it just the pic?
#93
Melting Slicks
Thread Starter
its a 22 gallon cell and the tank is above the rear differential and just a few inches below the rear exhaust panel. I will also build supports that will go under the cell for added protection once I take the body off. I will get a better angle shot later today
#95
Melting Slicks
Thread Starter
#98
Burning Brakes
#100
Burning Brakes