71 L-88 Replica (kinda)
#141
I can not stop smiling my Blueprint LS3/427Fi was delivered today and it looks great. It dyno'd at 618hp at 6200 and 574 lbs torq at 4400 rpm. At 2800 rpm it has 500lbs of torq. I also ordered my TKO600 5 spd from American Power train from the flywheel back so I am slowly moving fwd. Andrew at Blueprint was great to work with. I almost have the rear suspension together with fuel cell next. Bill at American Power train was very good as well.
The following users liked this post:
MISTERZ06 (05-25-2017)
#145
Not my C2. I just snagged some pics from Google to show the engine covers make a nice finish to the engine. So many people put lots of work in and just have the valve covers with all the wires going everywhere when they make a nice Corvette cover. Nice clean completed look.
#150
Burning Brakes
#152
Melting Slicks
Thread Starter
B-16 I' m going with the same wheel but in 18's just for the more options for tires. What do you plan on using for tire sizes and brand?
#153
Melting Slicks
Awesome, I wanted to keep the meat on the tires and not get too carried away. I have a set of 275/40/17 and 315/30/17 Nitto NT05s sitting at the shop doing a little curing. Just did all of my measuring for Scott at Team III and should be good now.
#155
Melting Slicks
#159
Melting Slicks
I am considering a American Powertrain TKO600 for mine, is it a nice kit?
#160
Melting Slicks
Thread Starter
Still looking for the GS, now I am getting @&#^%$ that I can not find it
The TKO 600 looks good and the service is first rate just disappointed I have a few things back ordered
The TKO 600 looks good and the service is first rate just disappointed I have a few things back ordered