front end suspension kits
Thread Starter
Intermediate
Joined: Jul 2010
Posts: 48
Likes: 2
front end suspension kits
im detailing my engine bay and plan on replacing all the rubber bushings. most the threads on here are about replacing with aftermarket kits. i want to keep my car as stock as possible. i dont care to win awards like top flight but i do want it to be as stock like as i can get it and afford. im looking at ecklers, zips front suspension kits in rubber. my question is, what type of quality parts are in the kits. is it best to buy the kit or are the individual parts of better quality. thanks for any and all advice.
Le Mans Master
Joined: Aug 2006
Posts: 7,425
Likes: 1,559
From: mount holly NC
2025 c3 ('74-'82) of the Year Finalist - Unmodified
2019 C3 of Year Finalist (appearance mods)
You might not need everything look at each part and go from there.
Front end bushings, tie rods, ball joints and everything else for the front can be purchased from the local auto parts store.
For the rear you have to use a sponsor.
Front end bushings, tie rods, ball joints and everything else for the front can be purchased from the local auto parts store.
For the rear you have to use a sponsor.
Supporting Vendor
Joined: Mar 2008
Posts: 576
Likes: 3
From: Muskegon MI
We use XRF front suspension parts here in the shop and in the catalog. They are as good as anything else out there, and a better value than most. Let me know if you would like more information.
Andrew
800-442-0335
Andrew
800-442-0335
