Missing Smog Muffler Pipe
Thread Starter
1st Gear
Joined: Nov 2008
Posts: 1
Likes: 0
From: Milwaukee Wisconsin
Missing Smog Muffler Pipe
I have a '68 with full smog setup....well, almost full setup....I have the smog pump, diverter valve and muffler but do not have the pipe that connects the muffler to the diverter valve. Not sure if it has a part # or what material I should make one out of? Any ideas?
Last edited by heyjay327; May 18, 2011 at 11:49 AM. Reason: oops
Team Owner
Joined: Jun 2000
Posts: 38,924
Likes: 1,481
From: Southbound
Cruise-In II Veteran
If it has a part number, the assembly instruction manual (AIM) will show it if it was installed on the assembly line as part of the AIR build up. If the hose came with the pump and did not need to be installed by a worker, the Corvette Parts & Illustration catalogue might show it.
It's also possible a replacement hose would be "cut from stock."
It's also possible a replacement hose would be "cut from stock."
Last edited by Easy Mike; May 18, 2011 at 12:17 PM.
