'72 SB with a/c and ps - Which Headers?
Thread Starter
Advanced
Joined: Nov 2010
Posts: 66
Likes: 0
'72 SB with a/c and ps - Which Headers?
'72 SB with a/c and ps - Which Headers
http://www.summitracing.com/parts/SUM-G9003/
http://www.summitracing.com/parts/HOK-2456HKR/
http://www.summitracing.com/parts/BIG-11106FLT/
Would any of these work with my '72 350 a/c, ps stock car? I would like to just replace the original manifolds but keep everything else stock/original. Is it possible and will any of these bolt up directly?
http://www.summitracing.com/parts/SUM-G9003/
http://www.summitracing.com/parts/HOK-2456HKR/
http://www.summitracing.com/parts/BIG-11106FLT/
Would any of these work with my '72 350 a/c, ps stock car? I would like to just replace the original manifolds but keep everything else stock/original. Is it possible and will any of these bolt up directly?
Melting Slicks
Joined: Jul 2009
Posts: 3,264
Likes: 3
From: Vero Beach FL
I went with the Summit brand on my 1971 at the time I bought mine the application guide for the Hookers said not for A/T 400. The Summit look just like the Flow Tech. Fit real well no mods needed. I have not mounted my AC compressor yet. One of the tubes on the passenger side is less than a inch from the AC evaporator. I will need to either wrap that part of the tube or create some sort of heat shield. It may or may not line up with your current exhaust but you will at least need to cut the front pipe.
