poly grease location??
Thread Starter
Drifting
Joined: Aug 2009
Posts: 1,635
Likes: 8
From: Enid Oklahoma
poly grease location??
When I install the poly bushings in my control arms, where does the grease go? On the inside of the bushing where the inner sleeve is? On the outside of the bushing between it and the outer shell? Or both? Thanks!
Race Director
Joined: May 2006
Posts: 18,784
Likes: 2,598
Thread Starter
Drifting
Joined: Aug 2009
Posts: 1,635
Likes: 8
From: Enid Oklahoma
That is confusing, I think that is for trailing arms, but I get the point as to where to lube, thanks.
Melting Slicks
Joined: Apr 1999
Posts: 2,010
Likes: 3
From: Moon Twp. PA USA
I saw a grease recommendation, for poly bushings, that said to use waterproof marine grease.
I picked up a tub at the boat store, and used it. No problems after 4 years. The grease is green in color.
I picked up a tub at the boat store, and used it. No problems after 4 years. The grease is green in color.
Le Mans Master
Joined: Sep 2001
Posts: 7,739
Likes: 630
From: Unreconstructed, South Carolina
slather grease everywhere ... EXCEPT female threads in the ends of the CA shaft.
Final step: spritz threads out w/ carb cleaner, DRY, then install clean bolts w/ Loctite.
Final step: spritz threads out w/ carb cleaner, DRY, then install clean bolts w/ Loctite.
