Please explain this wiring technique.
Thread Starter
Racer
Joined: May 2011
Posts: 431
Likes: 0
From: Willoughby Hills OH
Please explain this wiring technique.
My wires are drooping down by the exhaust manifold area and are probably melting a bit.
So I am thinking I need to do some re-wiring.
As seen in the pic below, how does someone accomplish this. My engine is almost all stock parts. I just love how clean this wiring job is, but not sure if I need a new air filter for this, or the piece right in-front of the filter. I am new to all this stuff.
thanks
So I am thinking I need to do some re-wiring.
As seen in the pic below, how does someone accomplish this. My engine is almost all stock parts. I just love how clean this wiring job is, but not sure if I need a new air filter for this, or the piece right in-front of the filter. I am new to all this stuff.
thanks
Drifting
Joined: Apr 2008
Posts: 1,305
Likes: 2
From: Lewisburg WV
thegazman
I tried running my spark plug wires like that. They look good, but hard to keep from burning them with a stock rams horm exhaust manifold. I wound up putting them back like General Motors had them; under the manifold.
