wiring help
Thread Starter
1st Gear
Joined: Sep 2011
Posts: 1
Likes: 0
wiring help
hey guys
we recently did a overhaul on a 75 vette stingray and i thought it would be smart to fix up the blukhead connector/wiring.
bear in mind it has been converted to left hand drive ( i live in aus).
ok so the problem is, i wrote down where each terminal goes but now for some reason is doesnt start at all and has no power what so ever. i must have missed a wire or wrote down some in the wrong spot, i dont know!
it has packard 56 terminals, not that its relevant.
so im completely lost, i dont know what to do. does any one have a wiring diagram that can help me.
thanks alot.
we recently did a overhaul on a 75 vette stingray and i thought it would be smart to fix up the blukhead connector/wiring.
bear in mind it has been converted to left hand drive ( i live in aus).
ok so the problem is, i wrote down where each terminal goes but now for some reason is doesnt start at all and has no power what so ever. i must have missed a wire or wrote down some in the wrong spot, i dont know!
it has packard 56 terminals, not that its relevant.
so im completely lost, i dont know what to do. does any one have a wiring diagram that can help me.
thanks alot.
Le Mans Master
Joined: Aug 2006
Posts: 7,419
Likes: 1,554
From: mount holly NC
2025 c3 ('74-'82) of the Year Finalist - Unmodified
2019 C3 of Year Finalist (appearance mods)
Intermediate
Joined: Dec 2005
Posts: 38
Likes: 0
Don't mean to hijack but we are working on the same year.
We have a blue and white wire coming out of the harness,behind the console, going to the rear of the car.
It seems to go toward the passenger side behind the seat.
This car was completely apart when we got it. So it is really a project.
thanks,
david
We have a blue and white wire coming out of the harness,behind the console, going to the rear of the car.
It seems to go toward the passenger side behind the seat.
This car was completely apart when we got it. So it is really a project.
thanks,
david
