"Convenience Console" Modification
Thread Starter
Intermediate
Joined: Mar 2012
Posts: 42
Likes: 0
From: San Jose Ca
"Convenience Console" Modification
Hey guys. I just purchased one of those "convenience consoles" and I'm a little disappointed. I'm not a fan of the lack of quality in the workmanship, but I can't really get around that and it's too much of a pain in the butt to send it back. The main thing I don't understand is that there are no hinges for the lid.
I've seen photos on here of some cars that have them. Have any of you guys that have them ever tried to add some hinges to the lid? It just seems goofy to me.
I've seen photos on here of some cars that have them. Have any of you guys that have them ever tried to add some hinges to the lid? It just seems goofy to me.
Thread Starter
Intermediate
Joined: Mar 2012
Posts: 42
Likes: 0
From: San Jose Ca
I got mine off of ebay, but this looks to be the same thing.
http://www.mamotorworks.com/corvette...1-54-1605.html
http://www.mamotorworks.com/corvette...1-54-1605.html
Race Director
Joined: Apr 2011
Posts: 11,183
Likes: 3,336
From: North of Toronto - Ontario
I never really looked but I didn't realized they just lifted off.
Not sure how convenient that would be trying to get something out of and put back on while on the move....
Mooser
Not sure how convenient that would be trying to get something out of and put back on while on the move....
Mooser
Thread Starter
Intermediate
Joined: Mar 2012
Posts: 42
Likes: 0
From: San Jose Ca
Exactly. It doesn't really seem to hold on very well either. If you took a corner or two, it seems like it would be flying off. And it just seems unfinished looking to me. I haven't installed it yet, but I'm thinking I'm going to try and add some hinges as well as maybe a keyed locking mechanism before I do. I was just wondering if anyone had attempted to do anything like that already and how it turned out.
Melting Slicks
Joined: Jun 2003
Posts: 2,802
Likes: 241
From: Niles, MI
I got mine off of ebay, but this looks to be the same thing.
http://www.mamotorworks.com/corvette...1-54-1605.html
http://www.mamotorworks.com/corvette...1-54-1605.html
Thread Starter
Intermediate
Joined: Mar 2012
Posts: 42
Likes: 0
From: San Jose Ca
I clearly said I got it clearly off of ebay and clearly the photo on ebay didn't clearly show the lid clearly sitting off to the side, clearly. So, clearly, the insinuation is clearly not appreciated. Clearly, I acknowledge the lack of a hinge and I clearly was looking for a way to clearly remedy this. And clearly, I was looking for helpful responses of others who had clearly tried to add a hinge to the console. But I will clearly state, "thanks anyway."
Melting Slicks
Joined: Jun 2003
Posts: 2,802
Likes: 241
From: Niles, MI
I clearly said I got it clearly off of ebay and clearly the photo on ebay didn't clearly show the lid clearly sitting off to the side, clearly. So, clearly, the insinuation is clearly not appreciated. Clearly, I acknowledge the lack of a hinge and I clearly was looking for a way to clearly remedy this. And clearly, I was looking for helpful responses of others who had clearly tried to add a hinge to the console. But I will clearly state, "thanks anyway."
Glad we cleared that up.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
Instructor
Joined: Feb 2008
Posts: 211
Likes: 2
Hey guys. I just purchased one of those "convenience consoles" and I'm a little disappointed. I'm not a fan of the lack of quality in the workmanship, but I can't really get around that and it's too much of a pain in the butt to send it back. The main thing I don't understand is that there are no hinges for the lid.
I've seen photos on here of some cars that have them. Have any of you guys that have them ever tried to add some hinges to the lid? It just seems goofy to me.
I've seen photos on here of some cars that have them. Have any of you guys that have them ever tried to add some hinges to the lid? It just seems goofy to me.
Burning Brakes
Joined: Dec 2010
Posts: 945
Likes: 10
From: Winston Salem NC
I've got velcro holding mine down in the back. I cleaned both surfaces very well and the velcro stuck ok. It is enough to hold in place but also give when I want to remove it. That space is handy for storing small items or a big drink. I also used s/s harware to attach the console to the waterfall. It adds some bling in that black space. Having an armrest is handy.
I agree a hinge would have been nice. This is on my list of things to improve on the car.
The match of the colors is perfect. The flash on the camera makes them seem mismatched but they are not.
I agree a hinge would have been nice. This is on my list of things to improve on the car.
The match of the colors is perfect. The flash on the camera makes them seem mismatched but they are not.
Thread Starter
Intermediate
Joined: Mar 2012
Posts: 42
Likes: 0
From: San Jose Ca
Well, sounds like velvet crochet it is. I'm thinking I'll figure something out for a lock and a piano hinge in the long run though. I agree with 7dSHARK. Basically, If you're looking to get one, I wouldn't recommend it. I'm more disappointed than I can express. Thanks for the replies.
