Need Dipstick Help
Thread Starter
Racer
Joined: Jun 2008
Posts: 270
Likes: 10
From: Macon Georgia
Need Dipstick Help
This is what I have -
It's a vortec crate engine which came with the above truck dipstick. I'm looking for something more accessible and consistent with the typical corvette design. Would an 80 to 82 stick & tube work with my block? I've also found on the forum suggestions to use the ZZ4 setup (GMPP Indicator & Tube). Obviously, I'm looking for a solution that'll work with headers. Please provide a pic with your solution. As they say, a picture's worth a thousand words! By the way, the car's a 69.
It's a vortec crate engine which came with the above truck dipstick. I'm looking for something more accessible and consistent with the typical corvette design. Would an 80 to 82 stick & tube work with my block? I've also found on the forum suggestions to use the ZZ4 setup (GMPP Indicator & Tube). Obviously, I'm looking for a solution that'll work with headers. Please provide a pic with your solution. As they say, a picture's worth a thousand words! By the way, the car's a 69.
Instructor
Joined: May 2004
Posts: 185
Likes: 0
From: houston tx
[IMG]
dipstick by miky2001, on Flickr[/IMG]
check my ad in parts for sale.
this goes right into the block, no tube. seals with an o ring. 0.453" diameter, so the hole in your block need to be a little bigger than that to let the oring in.
dipstick by miky2001, on Flickr[/IMG]check my ad in parts for sale.
this goes right into the block, no tube. seals with an o ring. 0.453" diameter, so the hole in your block need to be a little bigger than that to let the oring in.
Last edited by miky2001; Sep 21, 2012 at 04:46 PM. Reason: omitted info
