bare EQ Head CH305A -> what valves ?
#1
bare EQ Head CH305A -> what valves ?
Hello,
for my 305 Corvette 1980 C3 engine I got new bare EngineQuest heads CH305A, Intake Runner Volume 170 cc, Comb. Chamber Volume 58cc,
Intake Valve 1.94, Exhaust Valve 1.50
regarding the cam upgrade I'm thinking about:
a.)
Comp Cams XE262H-10 "Xtreme Energy" hydraulic flat tappet cam. 218/224 duration @ 0.050, .462/.469 lift,
or
b.)
Lunati #638-60101LK
Voodoo Camshafts
Lift: .454''/.468''
Duration: 256°/262°
RPM Range: 1000-5500
Now to my question:
what brand of valves should I purchase ? what lenght ? stock length or longer ? anything which is important which I should pay attention to ?
springs, etc.. are comming with the kits of comp cams or Lunati.
I'm looking for your well appreciated input.
best regards from Germany
Joerg
for my 305 Corvette 1980 C3 engine I got new bare EngineQuest heads CH305A, Intake Runner Volume 170 cc, Comb. Chamber Volume 58cc,
Intake Valve 1.94, Exhaust Valve 1.50
regarding the cam upgrade I'm thinking about:
a.)
Comp Cams XE262H-10 "Xtreme Energy" hydraulic flat tappet cam. 218/224 duration @ 0.050, .462/.469 lift,
or
b.)
Lunati #638-60101LK
Voodoo Camshafts
Lift: .454''/.468''
Duration: 256°/262°
RPM Range: 1000-5500
Now to my question:
what brand of valves should I purchase ? what lenght ? stock length or longer ? anything which is important which I should pay attention to ?
springs, etc.. are comming with the kits of comp cams or Lunati.
I'm looking for your well appreciated input.
best regards from Germany
Joerg
#2
305A is not correct for you engine, the catalogue says it's for 1996 to 2000, did you mean 350A?
#3