B/B solid cam question.........
Thread Starter
Safety Car
Joined: Feb 2000
Posts: 4,977
Likes: 38
From: Massachusetts , USA,
B/B solid cam question.........
My 66 , 427 was originaly solid cam...previous owner put in hydralic cam..is there a "MILD" solid cam out there that will not bleed off cylinder pressure , as my compression ratio is 9.5 to 1 , have Endlebrock alum heads with 110 CC chambers.......actually lookking for a high tourque , 6200 redline solid cam ................. :confused: as a 308 rear also comlicate things................................ :nonod:
Team Owner
Joined: Feb 1999
Posts: 34,453
Likes: 665
From: Republic of Texas
Re: B/B solid cam question......... (StrayDog)
I would go with the Comp Cam 282S grind. It's good to 6,000 rpms and has AWESOME torque. On Desk Top Dyno I made 500lbs+ of tq from 2,000 rpms to 45000rpms with my 468.
It has a little lope, but nothing to extreme.
:cheers:
It has a little lope, but nothing to extreme.
:cheers:
