edelbrock rebuild kit

Reply Subscribe

Thread Tools

Search this Thread

Feb 24, 2013 | 04:12 PM

jnb5101

Thread Starter

Le Mans Master

Joined: Jul 2006

Posts: 8,117

Likes: 104

From: charlotte north carolina

edelbrock rebuild kit

went for a cruise with my better half in the spring-like weather in charlotte today. the engine stalled due to flooding, but got us home.
who makes the best rebuild kit for an edelbrock?

Feb 24, 2013 | 04:24 PM

billcarson

Drifting

Joined: Aug 2010

Posts: 1,839

Likes: 45

From: nassau co. new york

i used the edelbrock rebuild kit and also ordered two brass floats,all went well with the directions and the car runs strong and smooth.(don't drop the tiny ball).

Feb 25, 2013 | 06:45 PM

captl27

Instructor

Joined: Jan 2006

Posts: 228

Likes: 1

From: Warwick New York

If you look into the kits from edelbrook they give you a broad range of options to ajust your fuel possiblities.

Feb 25, 2013 | 07:18 PM

jnb5101

Thread Starter

Le Mans Master

Joined: Jul 2006

Posts: 8,117

Likes: 104

From: charlotte north carolina

thanks for the replies. i got a #1477 kit from advance. opened the carb up and there was a lot of sediment in the bowls even though i have an auxillary in line filter.

Feb 25, 2013 | 07:35 PM

billcarson

Drifting

Joined: Aug 2010

Posts: 1,839

Likes: 45

From: nassau co. new york

i left out the fuel strainer screens above the float needle valves and left in the main inlet screen.i have another filter however before my electric fuel pump.

Feb 26, 2013 | 03:16 PM

captl27

Instructor

Joined: Jan 2006

Posts: 228

Likes: 1

From: Warwick New York

These Carbs float bowls are open to the air so every time you leave the car sit the gas evaporates leaving sediment behind. That is why if you leave the car for much more then a day the first start takes alot of cranking. That is unless you have an electric fuel pump.