Core Support
Thread Starter
Intermediate
Joined: Jul 2009
Posts: 46
Likes: 0
Core Support
Any advise on installing a new support on a 72 SB with auto trans and air ? I have been fighting this thing for two days. Its a stock type support for a direct fit Dewitts Rad. All 4 a arms are out. If I remove the condenser it will probally go in no problem.
Racer
Joined: Jan 2007
Posts: 427
Likes: 1
I believe I read somewhere were some guy's will remove the top bolts on the rad support and loosen the bottom ones to rock it towards the front for more access of the rad install. The hood would be off the car.
Hope this helps.
Hope this helps.
