Starter Ground
Melting Slicks
Joined: Apr 2002
Posts: 2,337
Likes: 14
From: Norfolk VA
Some have used the one starter mounting bolts to ground the starter. I have in the past before I got headers. Once my headers were installed, I moved it to a transmission bell housing bolt.
Le Mans Master
Joined: Oct 2002
Posts: 7,098
Likes: 378
From: Las Vegas - Just stop perpetuating myths please.
Make sure u have a ground strap from the block to the frame. Usually u find one on the starter side near the motor mount. Make sure u have one from block to frame other wise all your starter current and ignition current have to travel through the U-joint needle bearings to the frame and back to the batt because the motor mount is pretty much insulated. Those that eliminate that ground strap have some unique ign problems when driving.
cardo0
cardo0
