Tune Up.....
Melting Slicks
Joined: Apr 2001
Posts: 2,280
Likes: 0
From: colorado springs CO
Re: Tune Up..... (bsowa)
spark plugs.... easy job.... id go with bosch platinums...
spark plug wires :eek: :eek: :eek: if yours is all original, then thats a PITA!!! they feed through the motor mount and go under ignition shielding and are quite a hassle.....
thats another reason to upgrade to dynomax ceramicoats and re-route the wires over the top in nice wire holders....now i can change my wires in like 10 min if that..
:yesnod:
[Modified by daily_driver, 10:55 PM 7/28/2002]
spark plug wires :eek: :eek: :eek: if yours is all original, then thats a PITA!!! they feed through the motor mount and go under ignition shielding and are quite a hassle.....
thats another reason to upgrade to dynomax ceramicoats and re-route the wires over the top in nice wire holders....now i can change my wires in like 10 min if that..
:yesnod:
[Modified by daily_driver, 10:55 PM 7/28/2002]
Thread Starter
Instructor
Joined: Jul 2002
Posts: 178
Likes: 0
From: Fairfax VA
Re: Tune Up..... (daily_driver)
Must be original, since you cant see my wires....
Looks like the plugs might be tough. (we are talkign about the guy who's drian plug is stuck!)
What is the recomended way to get to them? From above or below?
Looks like the plugs might be tough. (we are talkign about the guy who's drian plug is stuck!)
What is the recomended way to get to them? From above or below?
Team Owner
Joined: Apr 2002
Posts: 26,563
Likes: 29
From: Northridge California
St. Jude Donor '14
Re: Tune Up..... (bsowa)
plug wires are pretty menacing...i bought wire looms & clipped the old wires and pulled them thru the mounts....ran them thru the looms...makes it a hell of a lot easier, and easier to change them out in the future.
