florida poll
Melting Slicks
Joined: Nov 2000
Posts: 2,663
Likes: 3
From: Palm Harbor FL
Re: florida poll (SIGNGUY)
I'd be a candidate if my rear end didn't look like this right now:
:eek: :eek: :eek:
But definately lateer :D :seeya
P.S. No, the car is NOT being held up by ramps and tool boxes. The tool boxes are just supportin the TA's right now, and the ramps are just stuck under there. There are four 3 1/2 ton floor jacks under there too.
:smash:
:crazy:
[Modified by 79MakoL82, 10:18 PM 8/5/2002]
:eek: :eek: :eek:
But definately lateer :D :seeya
P.S. No, the car is NOT being held up by ramps and tool boxes. The tool boxes are just supportin the TA's right now, and the ramps are just stuck under there. There are four 3 1/2 ton floor jacks under there too.
:smash:
:crazy:
[Modified by 79MakoL82, 10:18 PM 8/5/2002]
Melting Slicks
Joined: Nov 2000
Posts: 2,663
Likes: 3
From: Palm Harbor FL
Re: florida poll (vetteflame79)
The only REAL problem I've run into so far was trying to get the castle nut off the strut shaft/lower shock mount on the passenger side. Bubba had stripped the nut on the shaft. Thank goodness for Dremel. Other than that, there is a list of Bubba's and items that weren't bad YET, but quickly getting there that make me glad I'm ripping it completely apart. I should hopefully have the TA's out this weekend and then they and the differential are off to VanSteel. After that, I just hope I can get it all back together again!!! :eek: :eek: :eek:
