I like pictures...
Thread Starter
Intermediate
Joined: Oct 2014
Posts: 38
Likes: 0
I like pictures...
I had a few photos of when i built my 383 stroker, i should have taken more but I figured someone might need some ideas https://www.corvetteforum.com/forums...s/thumbsup.gif
Thread Starter
Intermediate
Joined: Oct 2014
Posts: 38
Likes: 0
Runs great. I am toying with the idea of switching out my Edelbrock performer 600CFM out for a holley 750. I just rebuilt the 600 too....
Anyway, I used VHT engine paint. sprayed very well. I had the engine chem dipped before the 0.030" over at the machine shop, so I just used some purple power, and some acetone for prep and it sprayed. went on very well actually. Have about 100 miles on the engine and no flaking, no burn off. good stuff.
Anyway, I used VHT engine paint. sprayed very well. I had the engine chem dipped before the 0.030" over at the machine shop, so I just used some purple power, and some acetone for prep and it sprayed. went on very well actually. Have about 100 miles on the engine and no flaking, no burn off. good stuff.
